top of page

Drop Off

When dropping off a machine please bring your foot pedal and power cord.

Additionally please bring the following:

  • Sewing Machines: bobbin and bobbin case (especially if experiencing tension issues)

  • Embroidery Machines: bobbin, bobbin case, and embroidery hoop

Services and Prices
Taking effect on 02/01/2026

​

General Service $95 + cost of parts (if applicable)

  • Cleaning and lubrication

  • Thread tension check and adjustment

  • Feed dog height and presser foot pressure adjustment

  • Bobbin case and hook inspection

  • Timing check and adjustment

  • Replace needle and bobbin (if under $15)

​

Serger Service $115 + cost of parts (if applicable)

  • Cleaning, oiling, and lubrication

  • Thread tension check and adjustment

  • Feed dog height and presser foot pressure adjustment

  • Timing check

  • Replace needles

​

Serger Timing $50

  • Because timing a serger requires more time and skill, this is a separate charge not included in a serger service

​

Embroidery Service $115 + cost of parts (if applicable)​

  • Cleaning and lubrication of embroidery arm

  • Thread tension check and adjustment

  • Feed dog height and presser foot pressure adjustment

  • Bobbin case and hook inspection

  • Timing check and adjustment

  • Replace needle and bobbin (if under $15)

  • Sew out (testing embroidery features)

​​

Embroidery & Sewing Service Combo $135 + cost of parts (if applicable)

  • Cleaning and lubrication (of machine and embroidery arm)

  • Thread tension check and adjustment

  • Feed dog height and presser foot pressure adjustment

  • Bobbin case and hook inspection

  • Timing check and adjustment

  • Replace needle and bobbin (if under $15)

  • Sew out (testing embroidery features)

​

Restoration Service $175

  • Sewing machines and sergers can become frozen or certain mechanical mechanisms can stick for a number of reasons (most commonly, sitting unused in storage). If your machine falls into this category we will recommend a restore service because it can take hours longer than a general service.

​

Rebuild Service $175 + hourly ($50/hour)

  • If the machine is stuck to the point that it is completely inoperable we recommend this service.

​

Bench fee $45

-If we have to open your machine to troubleshoot an issue and find that it's irreparable we charge this fee.

​

Labor fee $50/hour

​

bottom of page